To stay updated and informed Please kindly assist in sharing our post

Related image

iNew L3 Quick Review

iNew L3 runs on Android 5.0 Lollipop.

This device is a 5.0-inch ips touchscreen display with a resolution of 960 X 540 pixels.

A size of 144 x 71.8 x 7.8 mm and weighs about 160g.

Powered by 1.3GHz quad-core processor MediaTek MT6753 with Mali-T720 and 2GB of

RAM. There’s also 16GB of internal storage which can be expanded up to GB with


There is a 13MP primary camera with LED Flash and a 5-megapixel front selfie


This is a dual SIM Phone with other connectivity options like Wi-Fi, GPS and Bluetooth

4.0. Supports GSM+WCDMA+LTE FDD network mode. Sensors on this phone include

fingerprint, Compass Magnetometer, Ambient light sensor, Accelerometer, Proximity

sensor and Gyroscope.

This device is powered with a 2150Mah non-removable battery



How to flash this device using SP Flash Tool


Follow the instructions on how to flash the device carefully below

I will not take responsibility on whatever may happen to your device.

Flash at your own risk..

Make sure you are downloading the exact ROM of the device you want to flash because

flashing a wrong preloader, will make the device completely dead

(can't power on, can't charge and will not be detected by a computer)

  1. Download, MTK VCOM USB drivers from here

  2. Download, latest SP Flash Tool from here

  3. Launch Flashtool inside the extracted folder

  4. Click on scatter loader button

  5. Select the scatter file inside the stock ROM folder of the device you want to flash

  6. Select either Download only, Firmware Upgrade or Format + Download from drop down menu

  7. Click Download Button

  8. Now turn off and connect your device to PC

  9. Wait for flashing process to complete
  10. Reboot device

If you have any question, or any assistance or any request whatsoever, you are free to ask us below in our comment box section

No comments: