DOWNLOAD KINGZONE S1 STOCK ROM,FIRMWARE

333
 KINGZONE S1 STOCK ROM,FIRMWARE



Kingzone S1 Plus Quick Review

Kingzone S1 runs on Android 4.2.2 Jelly Bean.

This device is a 5.0-inch ips touchscreen display with a resolution of 960 X 540 pixels.

A size of 153.5 x 76 x 6.8 mm and weighs about 130g.

Powered by 1.3GHz quad-core processor MediaTek MT6582 with Mali-400MP and 1GB

of RAM. There’s also 8GB of internal storage which can be expanded up to 32GB with

microSD.

There is a 14MP primary camera with LED Flash and a 8-megapixel front selfie

camera.

This is a dual SIM Phone with other connectivity options like Wi-Fi, GPS and Bluetooth

3.0. Supports GSM+WCDMA network mode. Sensors on this phone include fingerprint,

Compass Magnetometer, Ambient light sensor, Accelerometer, Proximity sensor and

Gyroscope.

This device is powered with a 1700Mah non-removable battery

DOWNLOAD KINGZONE S1 STOCK ROM


KINGZONE_S1_I8258.K169.02.09.C.A.A-v04.0-0611

DOWNLOAD ROM

How to flash this device using SP Flash Tool

Note

Follow the instructions on how to flash the device carefully below

I will not take responsibility on whatever may happen to your device.

Flash at your own risk..

Make sure you are downloading the exact ROM of the device you want to flash because

flashing a wrong preloader, will make the device completely dead

(can't power on, can't charge and will not be detected by a computer)

Download, MTK VCOM USB drivers from here

Download, latest SP Flash Tool from here

Launch Flashtool inside the extracted folder

Click on scatter loader button

Select the scatter file inside the stock ROM folder of the device you want to flash

Select either Download only, Firmware Upgrade or Format + Download from drop down menu

Click Download Button

Now turn off and connect your device to PC

Wait for flashing process to complete

Reboot device

If there was no cache or userdata inside the ROM folder, you might need to factory reset device from

recovery after flash 222

No comments: